While switching the Printer, you might face the issue of Epson Printer Error Code 000043. It also occurs when there is no loading of the ink cartridge and printhead into the Printer as dust can accumulate in the printer scanner or inside the printhead. There are several reasons for Epson Printer Error Code 000043. In this guide, we will discuss the preventive steps to address such issues.
The Epson I3110 Error Code 000043 occurs due to the conflict in the scanner part of the device. It can also occur due to internal equipment issues or technical problems. It can seriously hamper or interrupt the work while printing. But, don't worry; here are some of the solutions that can work for you.
What is Epson Printer Error Code 000043 or 000033?
Epson Printer Error Code 000043 is the code associated with the ink cartridge. If there is any issue related to the ink cartridge, it reflects the numeric code either 000043 or Epson Printer Error Code 000033. If the error arises and you can't take the printout properly, then follow the troubleshooting guide.
Symptoms of Epson Printer Error Code 000043
Some of the symptoms why Epson Printer shows Error Code 000043 are:
- The Printer is not responding.
- Ink system failure.
- Black or blank printouts.
- Ink spilling.
- You can't take out the printouts.
Troubleshooting Guide for Epson Printer Error Code 000043
Now, let's check out the Epson Printer troubleshooting guide for Error Code 000043.
- Reset the Printer
Start by connecting the Printer and the computer with the USB cable. Now, go to the control panel and press the Printer and machine. You can search for a Printer and click on it and restart the device.
- Troubleshooting the Cartridge Problem
Start by turning on the printer system. Ensure that the cartridge is mounted properly. If the ink cartridge is expanded, then you need to replace it with the one unexpanded. From the metal chip, clean up the dust by using a soft cotton cloth. Ensure that the printer driver is reinstalled in the system.
- Install the Cartridge
Turn on the Printer and check whether the Printer is mounted properly or not. You need to remove the ink cartridge and reinstall it. If facing the same Epson Printer Error Code issue, then you need to tap on the start button to resolve the cartridge. Press activated pads and click on the start button. Now, take the test printout.
- Restart Printer
You need to cancel all the problems you are working on. Turn off the device and unplug the cable. You need to wait for 60 seconds and re-plug the cable. Restart the device and take a test printout.
- Inspect the Piece of Paper
Generally, because of the paper jam issue, you face Epson Error 000043. You need to pull-on the paper tray and sheet feeder. Now, press the start button to resume printing and press the power button to turn off the Printer. After that, you need to lift the scanner unit and then clean up the mess. Remove the stuck bits of paper and turn on the products back.
Conclusion
These are the above-mentioned Epson Printer troubleshooting tips, and tips will help get over Epson Printer Error Code 000043. Use the tips not to face any further issues.