If you’re looking for an answer to a question, How to remove MG3022 print head
and Canon Mg 3022 Setup for Mac, here you will know about it and how you can fix the issue. It can be done by removing the print head and clean thoroughly all the contacts on it; when reinstalling the print head, ensure that the ribbon cable connector is firmly plugged into the print head itself. However, if you are encountering the issue of canon mg3022 printer not responding, contact directly one of our expert member right away.
Convincible Steps to remove Canon MG3022 print head
- Open the top cover of the printer to get to ink cartridges
- Wait for the ink cartridges assembly to come to front/middle
- Unplug the printer and Lift up the gray lever on the right side of the ink cartridge assembly
- Remove all ink cartridges and Lift the black plastic print head up.
- The print head is a smaller piece inside the whole assembly that slides on the rail inside the printer.
- Grab from inside where the cartridges were sitting and the print head piece will come out easily.
If you want to know how to do Canon Pixma MG3022 Wireless Setup, it can be done easily by following the steps given below
- Switch on the printer.
- Press and hold the WiFi button until the indicator light flashes.
- Be sure that the blue light flashes.
- Power on the WPS button on your access point for 2 minutes.
- The Blue light Flash will continue blinking while searching for your access point.
- Once it is connected to the access point, WiFi and power light will flash.
- If the process succeeds, the electric and WiFi lamps will stop both naps.
- Try to print the settings of network of your printer to confirm whether the process is successful or not.
- Put a sheet of paper.
- Tap on the resume/cancel button until the indicator lamp shines 15 times and then release it.
- Your printer will print the information page of network, and the installation is over.
- Turn off both indicators when your printer is connected to Internet connection,
We assume that the steps mentioned above have worked exactly in the same manner as you expected. In case, it turns out to be the opposite as per your expectation, or you need more help for the other which you faced after applying these steps, then you need to look for the professional technicians who are available round the clocks.